17
5.4 Removing/Replacing filter bag
Remove and replace the filter bag when it is about
12 full.
To remove & replace filter bag or bags:
1. DISCONNECT MACHINE FROM POWER!
2. Release clamp around bottom of canister filter,
then remove filter bag.
3. Attach new filter bag around bottom of canister
filter and secure with clamp.
5.5 Removing/Replacing canister filter
If the canister filter is clogged or dirty and cleaning it
does not improve dust-collection performance, the
canister filter must be replaced.
To remove and replace canister filter:
1. DISCONNECT MACHINE FROM POWER!
2. Loose the
screws which
fixed the rubber gasket
and canister filter to the elbow.
3. Install the rubber gasket and new canister filter to
the elbow by the screws.
Dust exposure created while using machinery may cause cancer, birth defects, or
long-term respiratory damage. Always wear goggles and a NIOSH approved
respirator when working with the dust collection bags or canisters.
2
Greetings,
Congratulations, you just purchased the BMS.3200.IR Precision Saw, which was developed with the
Maksiwa’s highest standards of technology and quality. Your BMS.3200.IR Precision Saw allows you
to have the highest productivity in woodworking. Besides a great finish, the BMS.3200.IR ensures that
your cuts are always precise. It should be noted that to use this machine with maximum efficiency,
you should read and understand the instructions in this manual.
Visit our website to know about our launches and other product lines:
www.maksiwa.com
