6
3. Assembly
The cyclone dust collector is not pre-assembled. After unpacking, the machine must be installed.
Transport the dust collector in its packing crate to a place near its final installation site
before unpacking it. If the packaging shows signs of possible transport damage, take the
necessary precautions not to damage the machine when unpacking. If any damage is
discovered, the carrier and/or shipper must be notified of this fact immediately to
establish any claim which might arise.
3.1 Grounding instructions
The appliance must be grounded, if it should malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This appliance is equipped
with a cord having equipment-ground conductor and grounding plug. The plug must be inserted into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
For grounded, cord-connected appliances:
Make sure that the appliance is connected to an outlet
having the same configuration as the plug. No adaptor should be used with this appliance. If the
appliance must be reconnected for use on a different type of electric circuit, qualified service personnel
should make the reconnection.
For a permanently connected appliance:
This appliance must be connected to a grounded metal,
permanent wiring system; or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the appliance.
Inspect the machine completely and carefully, making sure that all materials, such as shipping
documents, instructions and accessories supplied with the machine have been received.
3.2 Placement location
Consider anticipated workpiece sizes and additional space needed for auxiliary stands, work tables,
or other machinery when establishing a location for this machine in the shop. See 2.2 Dimensions for
reference.
3.3 Unpacking
The machine is packed in three packages (One plywood cases and two cartons.)The following is a
list of items shipped with your machine. Before beginning setup, lay these items out and inventory
them.
A. Base
J. Vacuum hose
S.
A
dapter
B. Bracket
K. Hose clamp
T. Casters for base
C. Connecting rod
L. Vacuum ring
U. End cap
D. Impeller housing
M. Dust bag for drum
V. Quick–locking clamp
E. Elbow
N. Dust bag for filter
W. Canister filter
F. Rubber gasket
O. Casters for drum
X. Bag clamp
G. Rubber gasket
P. Drum handle
Y. Flexible hose
H. Cyclone funnel
Q. Cap for Y adapter
Z. Hose clamps
I. Dust collection drum
R. Steel clamp
2
Greetings,
Congratulations, you just purchased the BMS.3200.IR Precision Saw, which was developed with the
Maksiwa’s highest standards of technology and quality. Your BMS.3200.IR Precision Saw allows you
to have the highest productivity in woodworking. Besides a great finish, the BMS.3200.IR ensures that
your cuts are always precise. It should be noted that to use this machine with maximum efficiency,
you should read and understand the instructions in this manual.
Visit our website to know about our launches and other product lines:
www.maksiwa.com
