5
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
END201-7
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.... Read instruction manual.
.............. DOUBLE INSULATION
ENE001-1
Intended use
The tool is intended for planing wood.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA012-2
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
1.
Pointer
2.
Cutting depth indication
3.
Knob
4.
Lock button / Lock-off button
5.
Switch trigger
6.
Socket wrench
7.
Bolts
8.
Drum
9.
Planer blade
10. Drum plate
11. Adjusting plate
12. Inside edge of gauge plate
13. Blade edge
14. Screw(s)
15. Heel
16. Back side of gauge base
17. Gauge plate
18. Gauge base
19. Planer blade locating lugs
20. Heel of adjusting plate
21. Set plate
22. Inside flank of gauge plate
23. Mini planer blade
24. Groove of drum
25. Vacuum cleaner
26. Start
27. End
28. Handle
29. Cutting line
30. Edge fence
31. Align the “V” groove with the edge
of the workpiece.
32. Sharpening holder
33. Wing nut
34. Blade (A)
35. Blade (B)
36. Side (D)
37. Side (C)
Model
MT111
Planing width
82 mm
Planing depth
3 mm
Shiplapping depth
20 mm
No load speed (min
-1
)
18,000
Overall length
390 mm
Net weight
4.5 - 4.6 kg
Safety class
/II
Summary of Contents for MT111
