background image

 

1.  INTRODUCTION  

 

Congratulations on your purchase of this quality Mäktig product!     

Easy-to-use and designed for reliable service, this 800A jumpstarter can 
run many DC appliances whenever you need power for work or play, at 
home or on the road.    The 800A jumpstarter has an internal battery, and is 
designed to jumpstart vehicles such as SUVs, trucks, and vans.    This unit: 

 

Powers 12V DC appliances 

 

Jumpstarts vehicle engines up to 800A 

 

Has an overload protection for 12V DC outlet 

 

Includes a LED light for emergency lighting. 

Please read the manual before use and follow the included instructions! 

 

 

2.  SCOPE OF DELIVERY 

 

NO. DESCRIPTION 

Jump Starter with Jumpstart cables.   

It is the main body of 

the unit.

 

AC charging adapter.  

Lets you recharge the unit from a 

standard AC wall outlet and can only be used to recharge the 
internal battery of the unit.

 

Owner’s instructions.  

Read the instructions carefully before 

using the unit.

 

 
 

 

3.  IMPORTANT SAFETY INSTRUCTIONS 

 

This

 

Jumpstarter generates up to 800A. Operating the Jumpstarter 

incorrectly or misusing it may damage the equipment or create hazardous 
conditions for the user. 

NOTE: Before using your Jumpstarter, be sure to read and save 
these safety instructions. 

 

CAUTION:  

This unit is not intended for use as a UPS (Uninterrupted 

Power Supply).   

Summary of Contents for 710035











Reviews: