For preserving the aesthetical outlook, and maintaining the maximum
functionality, and efficiency of your light, cleaning is recommended from
time to time. Since the light is operated by solar energy, keeping the solar
panel clean & free of dust is key-essential to ensure its efficiency, and
maximize discharging time. Please follow the instructions below when
cleaning your light:
1.
Please always use a suitable, soft, and damp towel for cleaning the solar
panel
2.
Apply the towel with higher water content for the first time at each
cleaning procedure to remove the majority of dust preferably with one
movement.
3.
After washing the towel in continuous water stream to remove the
accumulated dust, squeeze the water out of the towel, and remove the
remainder of dust with the towel gently from the surface of the solar
panel if necessary. Care to avoid scratching the surface of the solar
panel.
4.
If you observe scaling, or other accumulated dirt on the surface of the
solar panel, please only use a chemical or natural enzymatic based
agent for cleaning which is recommended for solar panel cleaning by
its manufacturer.
5.
Cleaning of the plastic and metal parts of the light body can be executed
easily, but attention is needed to avoid scratching of the surfaces.ű6)
Cleaning the dome which protects the LED group from external effects
also requires cautious approach for cleaning to avoid scratching. Please
apply chapter 1)-4) above for the dome as it is written in case of the
solar panel.
The light recognizes low battery voltage, and switches off automatically
to prevent the battery from damage, and to maximize the life cycle of the
battery. Besides that, the light applies an eco-mode when the battery
level is low but sufficient for operation. In this case the light will shine at
a dimmed mode.
Please charge your light whenever any of the above
written occurs!
AUTOMATIC BATTERY PROTECTION
CLEANING INSTRUCTIONS
9
Summary of Contents for ANGLERSOL 20
Page 2: ...2...
