www.malags.com
16
line spacing, the grid size will also change to become the nearest divisible
value. The same applies the values of Grid size.
Press continue to reach the 3D Grid project layout screen to do a final
check of the project parameters:
Choosing Start activates the 3D Project. During data collection the two
buttons on the antenna or on the extension handle are used as remote
controls, for choosing the Next profile and Start profile.
The number in the blue rectangle
refers to the distance on the grid
carpet.
Place the antenna carefully over the
start position (the red triangle shows
the start point and direction), then
follow the step below:
1) Press the black button, wait for a beep, and release the black
button.
2) Start to measure, by moving the antenna along the line on the
carpet.
3) Continue the measurement until a beep is heard again. The CX
automatically ends the line.
