www.malags.com
31
9 System settings
__________________________________________________
The System menu of the CX unit can be
reached after choosing Quit on the main
menu, as if to shut down the unit. It is
reached by turning the turn-push button
3 clicks right, 3 clicks left and 3 clicks
right at the following screen.
In the System Menu the following changes are possible:
- Time and date
- Battery installation to set battery indicator level
- Activate the kill-switch. See below.
- Missed traces. If measurements are carried out too fast, this mode
guarantees that the traces are placed in correct position. As default
this option is ON.
- Auto-stacking. If Auto-stack is activated, the systems stacks each
measured sample as many time as possible according to your
measurement speed. Otherwise the number of stack can be chosen
between 1 and 512 (Changed under the option Stacks).
- Screen shots, data format
- Remote control, on or off. Activated if the system is used wit a remot
control.
- Power-Save. If the Power-
Save mode is on, the screen will “turn-off”
when inactive, and by that save power
- Filters button, visible or not in the General Settings screen. See
below.
- Signal search, made as max or threshold search
- Measurement unit (feet or meters)
- Depth scale (choose between centimetre/meter or inch/feet)
- BackLightning. The intensity of the screen light can be changed with
the Backlight option. When this value is decreased the light of the
screen decreases, which affects the battery capacity positively.
- Wheels editing. See below.
- Registration of GPS functionality.
- Data disk format. This carries out a formatting of the data disk in the
Monitor which can be needed if files cannot be erased, the disk
seems full etc. These types of problems may arise if the Monitor is
turned OFF without using the Quit option.
