Note:
Two serial numbers are attached to the equipment, 1) on the underside of the monitor
and 2) on top of the antenna under the power and GPS support.
Repacking and Shipping
The MALÅ Geoscience packing kit is specially designed for shipping MALÅ Easy Locator
HDR. The packing kit should be used whenever shipping is necessary. If original packing
materials are unavailable, pack the instrument in a wooden box that is large enough to
allow at least 80mm of shock absorbing material to be placed all around the instrument.
This includes top, bottom and all sides.
Warning:
Never use shredded fibers, paper or wood wool, as these materials tend to pack
down and permit the instrument to move inside its packing box.
Please read our shipping instructions before returning instruments to MALÅ Geoscience.
These instructions can be found on our website at
www.malags.com/Support/Service-
Registering MALÅ Easy Locator HDR
By registering your equipment, you ensure that you receive up-to-date documentation,
software upgrades and product information, which all helps to optimize the utilization of
the equipment and realize the maximum return on your investment.
To register your equipment, simply navigate to -
