Setting up the GPS
1
Open the
System Menu
See
for more information about accessing
and using the
System Menu
..
2
Open the
GPS Parameters Menu
Using the turn-push knob, navigate to the
GPS Parameters
Menu
button and press to open the menu panel.
Set the GPS parameters
Using the instruction provided in the
section, set the parameters for the GPS and select
and press the
Save and Exit
button to save the setting and
return to the
Systems Menu
.
Note:
When using the
COM port
to connect to an external
GPS antenna, two more parameters are displayed (
COM port
selected. These two parameters will need to be set to match
the value of the output from the external GPS. You may need
refer to the manufacturer's data sheet for the external GPS
antenna.