Tip:
The MALÅ Easy Locator HDR momitor is equipped with a
Zoom Function
for enlaring
areas of interest in the
GPR Profile
.
Use the
push-turn knob
to select the
Vertical scrollbar
. The vertical scrollbar turns yellow
when selected. Push the
push-turn knob
once to activate scrolling. The
Vertical
scrollbar
will turn blue indicating that it has been activated. Push, hold and turn the
push-turn
knob
to zoom in and out. the vertical scroll bar will be blue with arrows.
Quit and shutdown the system after completing the radar
measurements.
Note:
If the
QUIT
option is executed but the monitor is
not turned off immediately, the unit has to be put
through a power cycling sequence before it can be
restarted. This is achieved pressing the power switch
on the monitor and then waiting for 5-10 seconds
before pressing the power switch again. If this pro-
cedure is not followed, the unit will fail to turn on.
Press the
Start
button to start scanning. The GPR data
will begin to appear on the black screen as the unit is
moved forward.
