Tip:
Using the Hyperbola fitting tool is a good
way of calculating the soil type and usually
achieves the best results when estimating the
depth of a utility.
Acquisition Mode
Set the type of trigger to be used for initiating a
measurement. The trigger information is used to
establish the horizontal scale for each GPR profile.
Five triggering options are available:
l
Forward:
Uses the encoder located in the
left rear wheel when the MALÅ Easy Locator
HDR cart is pushed forward. (Default setting)
l
IBackwards:
Uses the encoder located in
the left rear wheel when the MALÅ Easy Loc-
ator HDR is pulled backwards.
l
RTC Forward:
Uses an external encoder as
in the case when using the encoder wheel
on rough terrain cart (RTC) is pushed in the
forward direction.
l
RTC Backward:
Uses an external encoder
as in the case when using the encoder
wheel on rough terrain cart (RTC) is pulled
in the reverse direction.
l
Time Triggering:
Used when horizontal dis-
tance information is not available, such as in
the case of rough terrain. Measurements are
initiated at specific time intervals.
System Parameters
Select this option to open the
and
apply system parameters.
Upload Screenshots
Upload GPR profile images to an USB thumb drive
connected to the monitor.
This option is only available if the
Upload GPS makers
Upload GPS makers to an USB thumb drive con-
nected to the monitor.
