Note:
This function is automatically disabled when a
scan is started.
Imperial or SI
Used to set the unit system, either Imperial or System
International (SI) .
The
push-turn knob
1
is used to select and set the
desired unit system. Rotate the knob to select either the
Imperial or SI
option, press to enter editing mode, rotate
to select a value and press again to set the selection and
exit editing mode.
Language
Used to set the language to be used for menus and sys-
tem options.
Rotate the
push-turn knob
2
to select the
Language
option, press to enter editing mode, rotate to select a
value and press again to set the selection and exit edit-
ing mode.
Hardware Tests
Used to perform self-tests of individual items of hard-
ware.
Rotate the
push-turn knob
3
to select the
Hardware
Tests
option and press to access the test screen.
1
The push-turn knob is fitted to MALÅ monitors and acts in a similar way to a computer mouse allowing
the user to navigate menus and update data. Rotating the knob either allows sequential scrolling
through menu options to make a menu selection or changes selected parameter values. Pressing the
knob either executes the currently selected menu option or sets the value of the selected parameter.
2
The push-turn knob is fitted to MALÅ monitors and acts in a similar way to a computer mouse allowing
the user to navigate menus and update data. Rotating the knob either allows sequential scrolling
through menu options to make a menu selection or changes selected parameter values. Pressing the
knob either executes the currently selected menu option or sets the value of the selected parameter.
3
The push-turn knob is fitted to MALÅ monitors and acts in a similar way to a computer mouse allowing
the user to navigate menus and update data. Rotating the knob either allows sequential scrolling
through menu options to make a menu selection or changes selected parameter values. Pressing the
knob either executes the currently selected menu option or sets the value of the selected parameter.
