Press the
push-turn knob
with the
Start Tests
button
selected to commence the testing. Each item of hard-
ware will be tested sequentially with the results of each
tested displayed on the screen and written to a file.
Rotate the knob to select the
Quit
button and press to
exit this screen.
Note:
These results can be uploaded to a pen drive
using the
Upload "test_results.jpg"
option for further
diagnosis of the system by MALÅ Geoscience or a
local representative.
Data Disk Format
Used to reformat the
SSD
1
radar data storage device in
the MALÅ Easy Locator HDR monitor.
Tip:
It is recommended that reformatting is performed
periodically to maintain peak performance for data
management.
Rotate the
push-turn knob
2
to select the
Data Disk
Format
option and press to initiate reformatting. A con-
firmation dialog is displayed before commencing the
operation. Use the
push-turn knob
to accept or reject
this action.
Note:
Reformatting does not affect the operating sys-
tem or the MALÅ Easy Locator HDR software.
1
SSD is an abbreviation for Solid State Drive, which the a randon access memory device used to stor-
age data.
2
The push-turn knob is fitted to MALÅ monitors and acts in a similar way to a computer mouse allowing
the user to navigate menus and update data. Rotating the knob either allows sequential scrolling
through menu options to make a menu selection or changes selected parameter values. Pressing the
knob either executes the currently selected menu option or sets the value of the selected parameter.
