Software Upgrade
Used to apply software upgrades to the MALÅ Easy Loc-
ator HDR software.
See
for more information on
installing these software upgrades.
Restore Predefined
Settings
Used to reset the system settings for the monitor.
Rotate the
push-turn knob
1
to select the
Restore Pre-
defined Settings
option and press to perform a reset
when experiencing problems or if you would like to reset
the settings to a predefined state. A confirmation dialog
is displayed before reset operation is performed. Use the
push-turn knob
to accept or reject this action.
Note:
This restore is a low-level reset and should be
performed as the first option before executing the
Restore Factory Settings
option.
Restore Factory Set-
tings
Used to restore the the original factory settings for both
the monitor and antenna.
Rotate the
push-turn knob
to select the
Restore Fact-
ory Settings
option and press to perform a reset when
experiencing problems, or if you would like to reset the
settings to the default factory settings. A confirmation dia-
log is displayed before reset operation is performed. Use
the push-turn knob to accept or reject this action.
Warning:
This option should only be used as a last
resort when the
Restore Predefined Settings
option
fails to solve the issues that you are experiencing.
NEXT SCREEN >>
Used to access the second
System Menu
screen.
Rotate the
push-turn knob
to select the
NEXT SCREEN
>>
option and press to display the second
System Menu
screen.
1
The push-turn knob is fitted to MALÅ monitors and acts in a similar way to a computer mouse allowing
the user to navigate menus and update data. Rotating the knob either allows sequential scrolling
through menu options to make a menu selection or changes selected parameter values. Pressing the
knob either executes the currently selected menu option or sets the value of the selected parameter.
