Default Start Depth
Used to set the default depth for the start of a GPR scan.
Tip:
It is good practice to start with a large value and
reduce this value later by using the zoom function.
Rotate the
push-turn knob
to select the
Default Start
Depth
option, press to enter editing mode, rotate to
select a value and press again to set the selection and
exit editing mode.
Time Interval
Used to set the triggering interval for GPR meas-
urements when
Time Triggering
is selected for the
in the
Rotate the
push-turn knob
to select the
Time Interval
option, press to enter editing mode, rotate to select a
value and press again to set the selection and exit edit-
ing mode.
Tip:
The
Time Interval
option is useful when uneven
terrain compromises the effectiveness of wheel meas-
urement.
Note:
A lower value decreases the distance between
GPR profile scans and vise versa.
GPS Parameters
Used to access the
GPS Parameters
option to set para-
meters.
Rotate the
push-turn knob
to select the
GPS Para-
meters
option and press to open the
GPS Parameters
screen
.
