Start measurement
The GeoDrone 80 communicates with the GX
Controller using WiFi.
The
icon indicates the WiFi-connection
status to the antenna.
If the controller has been used with a
different antenna, go to System- and WiFi
settings
to pair the GeoDrone 80
with the GX Controller (WiFi Initiation via
Wire).
Controller main menu. Chose the option GeoDrone Project.
6)
The main screen for GeoDrone
measurements, have three filters to
enhance the radargram
Background removal
Contrast
Time gain
7)
The default measurements settings are
good for most applications, but if
necessary, adjust settings in the Settings
menu.
8)
Start New Profile
9)
Ready for take off!
Note: In case the connection between the MALÅ GeoDrone 80 antenna and the GX Controller is
lost during measurements, the collected data will be stored in the internal memory of the
GeoDrone 80 and retransmitted to the GX Controller once the connection is re-established.
