LIGHT STRUCTURE, CONTENT OF THE BOX
ATTENTION! THE BATTERY NEEDS TO BE FULL-CHARGED BEFORE FIRST
USE! PLEASE PLACE THE LIGHT IN A SUNNY PLACE WITH ONE SOLAR
PANEL FACING TOWARDS THE MIDDAY SUN! FULL-CHARGE REQUIRES
AT LEAST ONE DAY (8 HOURS OF SUFFICIENT SUNSHINE)! PLEASE ONLY
PUSH THE ON/OFF BUTTON TO TURN THE LIGHT ON THE FIRST TIME
WHEN THE FULL-CHARGE PROCEDURE HAS BEEN EXECUTED LIKE IT IS
DESCRIBED ABOVE!
ATTENTION! The life span of the battery depends on you as well! Please
use the light correctly as described in this manual by positioning it
in a sunny place where sufficient sunlight is provided for charging
the battery every day. If you intend to turn off your light, and you do
not want to use it for a while, please make sure that the battery has
sufficient charge, and it is not totally discharged. If you would like to
store the light instead of using it, please turn off the light with the ON/
OFF button. In case of a longer storage, please turn on the light once
every month, put it in a sunny place in the morning, and turn it off at
dusk. In this case the light can be stored again for another month. It
may decrease the life span of the battery if the light is stored for a longer
period with a totally discharged battery, moreover it can damage the
battery!
ATTENTION! The light sensor switches off the light even at night if it
receives high luminosity lighting from above! Do not place your light in
a position where other light sources can hinder its operation (e.g. do not
place the light below high luminosity street light)!
ATTENTION! Battery is built-in, non-replaceable!
Content of the box:
•
Onyx Twin Warm White light (2 pcs)
•
Screws with hit-in dowels for fixing the light on a
hard surface (4 pcs)
•
Threaded pin with a washer, and nut for fixing
the light in soil (2 pcs)
Light structure:
1 - Solar panel
2 - ON/OFF button, LED chips
3 - Oxidized Aluminium column
4 - Stand/pin
4
Summary of Contents for ONYX TWIN WARM WHITE
Page 2: ...2 ...
