USER INSTRUCTIONS
1. Instructions, and information about using the battery, and
maximizing its life span
ATTENTION! The life span of the battery depends on you as well! Please
keep using the product as described in this manual to maximize its life
span for your pleasure:
•
Whenever you turn off your light after use, please make sure that
the battery did not run low. If that happens (the light indicates low
voltage by decreasing the luminosity), please load the battery!
•
It is recommended to full-charge the light before use!
•
If you do not use your light for a longer period, please always pay
attention to full-charge the battery ONCE A MONTH! The light can be
stored on the shelf for another month after that. A long-term storage
of the light with totally discharged battery may significantly reduce
the life span of the battery, or may damage the battery!
ATTENTION! THE STANDBY OPERATION OF THE LIGHT CONSUMES
BATTERY CHARGE AS WELL, WHICH MEANS THAT THE BATTERY IS
BEING DISCHARGED SLOWLY EVEN WHEN YOU DO NOT USE YOUR
LIGHT! THAT IS WHY IT IS KEY ESSENTIAL TO KEEP THE ABOVE WRITTEN
INSTRUCTIONS!
2. Installation and use
If you intend to fix your light, please mark the 4 fixing points of the light
on the chosen surface (wall/ceiling). ATTENTION! The light’s angle can be
adjusted by rotating the light body between the 2 plastic consoles located
at both ends. The fixing holes are located on these consoles (2 on each). If
you push the console too tightly on the light, the light can hardly be rotated
after fixing. If you let the 2 consoles too loose on the ends, the light will
shine downwards, and the angle won’t be adjustable. Set the consoles on
both ends correctly before marking the place of the light on the chosen
surface.
Wall switch
5
Summary of Contents for SUNSTONE TRAVELLER 600
Page 2: ...2 ...
