USER INSTRUCTIONS
1.
The light can be activated by the ON/OFF button on the side of the light
after assembly. The default mode is automatic ON/OFF by light sensor.
2.
Daytime operation can be activated in manual mode. If you do not turn
off the light in daytime mode, it will automatically turn off in 12 hours
(depending on battery charge).
3.
If you try to turn on the light but do not succeed, and a red indicator
light blinks, it means that the battery does not have enough charge for
operation. In this case please charge the light.
5. Charging by solar panel
•
Please only use the original cable supplied with the light for charging
the battery!
•
If the original cable supplied with the light or its adapter is injured, do
not use it for charging!
•
Do not disassemble the light!
•
If you do not use your light for a longer period, please pay attention to
charge your light from time to time as written above in chapter 1!
•
Please pay attention to keep the solar panel clean. Please follow
“Cleaning instructions” below for cleaning your light!
•
In case of sunny weather, you can charge your light outdoors, as well as
indoors with the solar panel well-positioned, if you have direct sunlight
coming through a window.
•
In order to maximize the efficiency of solar charging, please rotate the
solar panel to approximately 45 degrees facing towards the sun.
8
Summary of Contents for SUNSTONE TRAVELLER 600
Page 2: ...2 ...
