background image

   

1. Instructions, and information about using the battery, and 

maximizing its life span

ATTENTION! The life span of the battery depends on you as well! Please 

keep using the product as described in this manual to maximize its life 

span for your pleasure:

• 

Whenever  you  turn  off  your  light  after  use,  please  make  sure  that 

the battery did not run low. If that happens (the light indicates low 

voltage by decreasing the luminosity), please load the battery!

• 

It is recommended to full-charge the light before use! 

• 

If you do not use your light for a longer period, please always pay 

attention to full-charge the battery ONCE A MONTH! The light can be 

stored on the shelf for another month after that. A long-term storage 

of the light with totally discharged battery may significantly reduce 

the life span of the battery, or may damage the battery! 

ATTENTION! THE STANDBY OPERATION OF THE LIGHT CONSUMES 

BATTERY CHARGE AS WELL, WHICH MEANS THAT THE BATTERY IS 

BEING DISCHARGED SLOWLY EVEN WHEN YOU DO NOT USE YOUR 

LIGHT! THAT IS WHY IT IS KEY ESSENTIAL TO KEEP THE ABOVE WRITTEN 

INSTRUCTIONS!

   2. Installation and initial operation

1. Measure and sign the location of the light consoles on the chosen 

surface. It is recommended to locate the consoles 20 cm away from both 

ends of the light like shown on the picture above, and mark the location of 

1

USER INSTRUCTIONS

5

Summary of Contents for SUNSTONE TRAVELLER PRO 1500


















Reviews: