background image

video as a proof made by for example your cell phone about the issue. 

If you can do the video, please attach in low resolution to your e-mail, 

or  upload  it  to  a  free  file  sharing  platform,  and  send  us  the  link.  We 

examine your case as soon as possible, and contact you with a solution. 

We either can fix your problem remotely, identify the wrong setup, and 

help you address it, or we identify the failed component. In the latter 

case, we send you a replacement for that part, if the component can be 

replaced by the customer, and do not require service. If we determine 

that the light has a technical issue to be addressed at the service, 

according to our decision, there could be 2 ways to go:

• 

We either decide that the light cannot be repaired economically, and we 

supply you a brand-new product, in this case you have no further action 

needed to be done, we inform you about the details of the delivery. The 

process takes 3-5 working days (+ transportation time 6-10 working 

days) if the product is on stock. If the product is not on stock the process 

takes longer period, but in this case, we are in continuous contact with 

our customer, and provide information about the delivery status.

• 

Or we decide to call back the product for service, and fix the problem. 

For this scenario, we tried to make the process for our customers as 

simple, and easy as possible: we have a contract with our courier (FedEx-

TNT) for returning the goods to us for service. In this case you just need 

to  pack  the  products  in  a  box  caring  to  fill  the  void  spaces  with  the 

necessary elements to prevent damage during transportation, close & 

seal the box safely, and wait for the call of the courier driver. Although 

not obligatory, we recommend you to keep the box of the product with 

the original packaging material, it could make it easier for you if service 

is needed. Please care to pack every content in the box, all accessories 

you received with your light. Once you handled the box to the courier, 

we take care about the rest for you: once the service of your product is 

done, we send it back to you, or if the problem cannot be fixed, we send 

you a new product. 

All the above written are free of charge for you, 

our company takes care about all the expenses during the warranty 

period.

Basic warranty terms:

1. 

Warranty period / scope 

With the warranty, our company guarantees that the product does not 

have any material or workmanship defects at the time of the purchase. 

The warranty period varies between 1-3 years from the date of 

WARRANTY TERMS

12

Summary of Contents for ZEPHYR 60 GREY















Reviews: