USER INSTRUCTIONS, INFORMATION
1.
After receiving your light, please open the light’s box gently with paying
attention not to cause harm to the light and its parts.
2.
Before starting to use your light, please make sure that there are no
visible damages on the light and its parts.
3.
If you observe breaking, crack, fracture on the light or on its parts,
please do not use the product, but contact us for replacement.
4.
Please do not apply strong physical force on the product that can
damage the light or its parts. Non-ordinary use of the product results
the loss of product warranty.
5.
Please keep the box, the packaging material, and the content out of the
reach of children, and pets. There are small objects among the parts
of the light, which children or pets can ingest, or can cause harm to
themselves with.
6.
Please do not disassemble the light, do not bend the light, or apply
physical stress on the light. Please follow the user manual’s instructions
for installation, and operation.
7.
Do not expose the light to higher heat than natural caused by weather
changes. Excessive heat may damage more constituents of the light.
8.
Do not expose the light to continuous high- or low-pressure water flow,
even if you intend to clean your light. The IP65 protection does not mean
you can put the light in water, or you can wash the light with continuous
water stream. The next chapter declares the right method of cleaning.
9.
Please always contact Malatech Water, Ltd, or a professional appointed
by our company if you intend to disassemble the light, remove any
of its parts, or service the light. Service attempts made by users are
prohibited, and result the loss of product warranty.
In case of poor daytime light conditions (continuously overcast, cloudy
weather throughout multiple days, low sunshine hours in wintertime)
the light recognizes low battery voltage, and switches off automatically
to prevent the battery from damage, and to maximize the life cycle of
the battery. Whenever the charge of the battery is sufficient for safe
operation, the light turns on in the dark. The process is automatic,
interaction by the user is prohibited. Besides that, the light applies an
eco-mode when the battery level is low but sufficient for operation. In
this case the light will shine at a dimmed mode.
AUTOMATIC BATTERY PROTECTION
8
Summary of Contents for ZEPHYR 60 GREY
Page 2: ...2 ...
