15.A
13-05-03
Step 23
Removing and/or replacing the drum support surround (A340):
(a)
Remove the top cover (
B360
) as described in
Step 1
.
(b)
Remove the rear panel (
B580
) following
Step 16
, dismantling only those parts necessary.
(c)
Manually remove the belt (
A290
) from the drum and motor following
Step 18
.
(d)
Remove the drum assembly (
A300
) following
Step 19.
(e)
Disconnect the wires from the two thermostats (
A108
) and (
A220
) noting their positions.
(f)
Manually lift the door seal (
B100
) to gain access to the seven fixing screws (
B200
).
Remove these screws using a screwdriver to release the drum support surround.
(g)
Disengage the drum support surround from its lower housing (on the front part of the drier)
and then remove it from the rubber coupling (
A230
).
NB:
When replacing the drum support surround (
A340
), recover the following components for refitting:
- Filter housing (
A450
)
- 95°C automatic reset safety thermostat (
A108
)
- 50°C minimum temperature thermostat (
A220
)
When ordering, it is advisable to specify the exploded view reference code
LVK067
in order to receive
the Drum Support Surround (
A340
) already assembled with the Felt seal (
A410
) and Slide Blocks (
A530
).
(h)
To re-assemble, follow the same procedure in reverse order, following
Step 19
to re-assemble the drum and then
Step 18
to refit the belt.
M A I N T E N A N C E P R O C E D U R E S
A530
A340
A450
oo
oo
ooo
ooo
oooo
oooooooooooooo
oo
oo
ooo
oooo
ooooo
ooooooooooo
oo
ooo
ooo
oooo
ooooooo
oooooooo
A410
LVK067
A230
A360
A220
A108
oo
oo
ooo
ooo
oooo
oooo
oo
oo
ooo
ooo
oooo
}
B100
B200
