background image

BASIC OPERATION AND SAFETY

 

1. Connect to an industry standard 9 Volt DC power supply!Incorrect voltage and 
AC power supplies will damage your pedal and void the manufacturer’s warranty! 
We also recommend using our Malekko 9 Volt Wall Wart, available through our 
website.
2. Do not use this apparatus near water.
3. Clean only with dry cloth.
4. Do not block any ventilation openings. Install in accordance with the manufactur-
er’s instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or 
other appara

tus (including amplifiers) th

at produce heat.

6. Protect the power cord from being walked on or pinched particularly at plugs, 
convenience receptacles, and the point where they exit from the apparatus.
7. Unplug this apparatus during lightning storms or when unused for long periods 
of time.
8. No user serviceable parts inside. R

efer all servicing to qualified service person

-

nel. Servicing is required when the apparatus has been damaged in any way, such 
as power-supply cord or plug is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
9. WARNING:To reduce the risk of

 fi

re or electric shock, do not expose this appara-

tus to rain or moisture.
10. Refer to labels on the unit, including bottom cover, or other markings and 
pertinent information.

PG. 3

THICKEN MANUAL V.1

Summary of Contents for THICKEN










Reviews: