73
Cleaning and care
General notes
Clean the appliance regularly, preferably after each use. Allow the appliance to
cool down to a safe temperature before cleaning.
Do not use a steam cleaner to clean this appliance. The steam could reach elec
-
trical components and cause a short circuit. Pressurised steam could also cause
permanent damage to the surface and to other components, for which Malloca
cannot accept liability.
Do not use any sharp pointed objects which could damage the seal between the
glass surface and the worktop.
Do not let the ignitor in the burner get wet. If it gets wet it will not spark.
After cleaning, dry the surfaces thoroughly with a soft cloth to prevent a build-up
of limescale deposits.
Pan supports, controls
Remove the pan supports.
The pan supports and the controls can be cleaned with a solution of warm water
and a little washing up liquid applied with a soft sponge. Soak stubborn soiling
first to loosen it.
Finally, wipe dry using a soft cloth.
