5.
Hang the hood from its hanging plates on the wall at points
(A, B). If the hood is not parallel, position its shape to parallel
by tightening or loosening M5x35 screw (3).
6.
Tighten A + B fixing screws on the wall, and completely
secure the product at point C.
7.
Make the air connections of the product.
10.2 AIR EXIT INSTALLATION
1- Ø150/120 mm Plastic Flue Adapter (Option)
2- 3,5x9,5 Rysb Vida
3- Ø150 mm Plastic Flue (for models that don’t feature self flue
exhaust)
4- Body
Place the Ø150 mm flue adapter on the product body and install it
with 3,5x9,5 rysb screw (Fig. 13).
Models that feature self flue exhaust do not feature
Ø150 mm flue adapter.
Place Ø150/120 mm plastic flue adapter if piping diameter at air
outlet is smaller than Ø150 mm (Fig. 13).
Ø150/120mm plastic flue adapter is sold optionally.
If the product you purchased does not have this
part you ask for it from your authorized dealer.
Fig. 13
ASSEMBLY OF PRODUCT
AIR EXIT INSTALLATION
19.07.2018
USERS MANUAL CHIMNEY HOOD
21
