10.3 ASSEMBLY OF SHEET METAL FLUES
1- Inner Flue
2- Flue Connection Plate Fixing Screws
3- Flue Connection Plate
The outer and inner sheet metal flues are assembled one within
the other (Fig. 14).
n
The cooker hood is set in the midst, and then the flue con-
necting plate (3) is directly affixed to the wall, under the cover
or points E and F are marked after performing a measurement
().
n
Drill points E and F with Ø6mm drill bit, and insert Ø6mm
plastic wall plugs (10). Insert the flue connection plate (9) with
3,9x22 screws (8) ().
n
Affix the inner flue (1) to the flue connection plate (3) from its
left and right sides with 2 3,5x9,5 screws , by pulling it
upwards.(Fig. 14)
Fig. 14
ASSEMBLY OF PRODUCT
ASSEMBLY OF SHEET METAL FLUES
19.07.2018
USERS MANUAL CHIMNEY HOOD
22
