13
To use this range hood in recirculation mode,
install the recirculation module so that the
aspirated air is blown through the
recirculation module back to the kitchen area,
e.g., through to the skirting board of the
kitchen furniture, or the like.
The stainless steel front panel with drawer is
locked with magnets in the module. To install
and to remove later to change the carbon
filter pads, draw towards the front the front
panel with the drawer.
For carbon filter assembly fix a place under
the bench.
Remove the sheet from the air outlet(Fig.
3a) , screw the rectangle adaptor (Fig 3b)
Immobilize carbon filter box to a proper place
from mounting holes
Affix one side of Round Flexible duct to the
product , other side to the adaptor (Fig.3c)
Fig 3: Recirculation module
2.3.7 Hood for recirculation mode
2 Unpacking and Installation
Fig 3a
Fig 3b
Fig 3c
