14
3 Operation
3.1. Lift operation
Fig. 4: Touch control operation panel
The hood is in STANDBY mode when it is
powered. In this state, the display shows
nothing.
Moving the lift out
By touching the or button, the lift moves
up.
Info: As long as the lift is extended by less
than 20 cm, the display will show a “0” after
touching the button. When the lift is then
raised by higher than 20 cm, nothing will be
shown on the display. Neither motor nor light
goes on in this condition.
After touching the button, the light goes
on after 20 cm of lifting height, but motor
does not.
Stopping the lift or pulling it out again
By
touching the arrow button or the lift is
stopped and/or started in the direction of the
arrows.
Info: The lift can be stopped or moved only
after the height of 20 cm.
Lowering of the lift
By touching the .
Info: After the lift has reached a height of
less than 20 cm, the motor and the lights turn
off, and the hood is in the standby mode. In
this case, no indicator lights on the display.
3