Malloca K-3410DR, Instruction Manual

15

In the event that any obstacle exists on the 

way of the lift when closing, e.g. a pot, dishes, 

hands, etc., the movement is stopped when 

the cover plate hits the obstacle and the lift 

then goes up again.

Motor on/off and changing the power 

settings

Each time the         button is touched, the 

running stage increases by one step up to the 

max. Level 

3

 is reached. The display 

will shown in each case theselected running 

stage.

Touching the   button decreases the running 

stage by one step each time; until the motor 

is switched off.

Nothing will be shown on the display then.

By  touching  the      button  for  about 

3  seconds,  the  automatic  delayed  shutoff 

function  will  be  activated.  The  set  running 

stage  starts  lashing  on  the  display.

15 minutes after the activation of the automa-

tic delayed shutoff function, the motor and/or 

the  light  will  be  switched  off  automatically. 

The lift will remain stopped then.

To  change  the  running  stage  within  the  set 

Automatic  Delayed  Shutoff  Function  time 

of  15  min,  touch  the  button    or   

The 

Automatic delayed shutoff function will remain 

active.

The  automatic  delayed  shutoff  function  can 

be  turned  off  at  any  time  within  the  15 

minutes.  To  do  this,  the  button            must  be 

pressed for about 3 seconds.

3.2. Motor operation

3.3. Automatic delayed shutoff 

function switching and changing

Safety function when clo-

sing the lift:

3 Operation