21
4 Maintenance
4.5.1 Removal and installation
of the carbon filter pad from and
into the recirculation module
Remove the stainless steel front panel from
the magnets towards the front. Pull out
upwards the carbon filter pad which is now
visible from the top. Reinsert the pad after
washing or install a new one behind the
stainless steel front panel, and push in the
drawer contacting the magnets.
4.5.1 Washing of the carbon filter
pad
The active carbon filter pad can be washed 3
times. The service period is 3-4 months under
normal cooking conditions is, 2-3 months
under frequent cooking practice, then it must
be washed, or replaced with a new filter pad.
It can be washed by hand or in a dishwasher
at a standard program up to max. 55°C.
Wash the pad alone in the dishwasher, so
that no leftover food, etc., come into contact
with the pad. Do not use any intensive stage,
as otherwise damage could occur.
Leave the filter pad to dry in air, or in the oven
at 80°C max. for 40 minutes. If the active
carbon filter pad is not washed regularly and
replaced, louder motor noise and increased
cooking smells may result in the kitchen
