background image

10

 

 

 

 

4 CLEANING AND PREVENTI- 
VE MAINTENANCE

 

         ATTENTION         

 

 

Prior  to  each  maintenance  and  cleaning, 

cooker hood must be unplugged, and appliance 
must be dead 

 

Cleaning and user maintenance of the ap- 

pliance  shall  not be  performed  by  unattended 
children. 

 

The  surface  could  be  damaged  due  to  ag- 

gressive and abrasive cleaning agents. Never 
use aggressive and abrasive cleaning agents. 
Supply your cleaning and protective substanc- 
es that are appropriate for your appliance from 
the  authorized  technical  service.  Surface  of 
appliance  and  control  units  are  sensitive  to 
scratching. 

 

Clean  the  surfaces  with  a  soft  and  damp 

cloth, dish-washing liquid or mild glass cleaning 
agent.  Soften  the  dry,  sticky  dirt  with  a  damp 
cloth. Do not scrape! 

 

It is not appropriate to use dry cloths, sponges 

that may scratch, materials that require rubbing, 
and other aggressive cleaning agents contain- 
ing sand, soda, acid or chlorine. 

 

Clean  the  stainless  steel  surfaces  in  their 

brushing direction only. 

 

Do  not  use  stainless  steel  cleaning  agents 

and  wet  clothes  for  control  units.  Cleaning  of 
metal  grease  filters  Used  metal  grease  filters 
retain the greasy particles in the moisture and 
vapour generated in the kitchen. Clean the met- 
al grease filters about every three months, un- 
der normal use conditions (1 to 2 hours a day). 

 

Do not use excessively effective, acidic or al- 

kaline cleaning agents. 

 

For  cleaning  the  metal  grease  filters,  clean 

the holder parts of the metal grease filters in the 

appliance, with a damp cloth as well.

 

 

You can clean the metal grease filters in the 

dishwasher or by hand.

 

4.1  Washing in Dishwasher 

 

In  case  of  washing  in  dishwasher,  a  slight 

change might occur in colour. This has no effect 
on the function of the metal grease filter. 

 

Do  not  wash  the  excessively  dirty    metal 

grease filters together with dishes.

 

 

Place  the  metal  grease  filters  loosely  and 

freely  in  the  dishwasher.  Metal  grease  filters 
must be placed in the dishwasher without jam- 
ming. 

4.2  Hand Wash 

For stubborn dirts, you can use a special 
grease solvent. You can buy such an agent 
from the authorized sales centre.

 

 

Soften the metal grease filters in a hot  water 

with dish-washing liquid.

 

 

Use a brush for cleaning and wait for the  liq- 

uid in metal grease filters to flow off completely.

 

 

Rinse the filters thoroughly after cleaning. 

         ATTENTION         

 

Thanks to timely cleaning of metal grease filter, 
the fire danger caused by excessive heat that is 
generated during frying is avoided.

 

4.3  Removal/Installation of Alumini- 
um Filter 

Pull the aluminium filter towards you by press- 
ing on its tab. Reverse the process to install the 
filter.

 

Summary of Contents for K1506





















Reviews: