MP-JA-101102
Plug-in Mechanical outdoor Timer
Model: EMT446
19 081 93
insTrucTion MAnuAl
Malmbergs Elektriska AB, Po Box 144, sE-692 23 kumla, sWEDEn
Phone: +46 (0)19 58 77 00 fax: +46 (0)19 57 11 77 info@malmbergs.com www.malmbergs.com
EN
sETTing THE on/off PErioDs
This timer can set up to 24 on/off commands a day.
using your finger, a pen or screwdriver pull up all the segments that correspond to the desired
“off” period. for the desired “on” period, make sure the segments are pushed down.
Each segment represents 30 minutes.
sETTing THE TiME
Turn the dial clockwise until the triangular pointer is pointing at the actual time.
connEcTion
once the desired on/off periods and actual time are set, plug the Timer into the wall socket,
and then the appliance’s plug into the Timer. Ensure the wall socket and the appliance are on.
The Timer will start to operate and switch on and off the appliance according to the pre-set on/off
commands.
sPEcificATions
Power Supply:
230v~, 50Hz
Capacity:
16A resistive load
Accuracy:
±10 Min
Protection Class:
iP44
PrEcAuTions
Note: Use only outdoor rubber plug.
Timer should be mounted vertically with plug up and segment down, so as to achieve the
•
protection class: iP44.
Do not use with any appliance, which exceeds the capacity of the Timer.
•
Always ensure that the plug of any appliance is fully inserted into the Timer.
•
if you need to clean the Timer, remove from the mains and wipe with a dry cloth. Do not immerse
•
in water or any liquid.
fan heaters and heaters with exposed elements should not be left unattended, and it is recom-
•
mended that this type of appliances are not to be connected to timers.
