Section III Product Operation and Caution
I. Operation
1
）
The Dehydrator tray shall be clean and wiped by cloth for initial use.
2
）
The pre-treated food is placed on each tray; the trays are then put on the unit housing
and close the cap.
3
）
Introduction to panel operation and display screen
Power Key
，
Start/Pause Key
, Set Key
,Time
，
Temperature
，
Bell
，
Warning Bell (Buzzing alarm sign)
，
3
Wavy Lines (Heating sign)
4
）
Power on; Insert the power cord plug into the socket, turn on the power and press the
power key. Time
, Temperature
, Bell
, Warn Bell
(Buzzing alarm sign)
and
3 Wavy Lines (Heating sign) will be shown on the display screen.
5
）
Press set key the first time, time start flash, the default time is 10:00h.
Increase or
decrease time by pressing the arrow direction through the knob.
Each increase or
decrease time is 30 minutes. A
fter increase time up to 24:00h, time will turn to 01:00 hour
directly. After decreased time up to 01:00 h, time will turn to 24:00h directly. The longest
time is 24:00h and the shortest time is 01:00 h.
6
）
Press set key the second time, temperature start flash, the default temperature is 45 .
℃
Increase or decrease temperature
by pressing the arrow direction through the knob
. Each
time temperature can increase or decrease 5 , after temperature increasing up to 70 , it
℃
℃
will turn to 35 directly. After temperature decreasing up to 35 , it will turn to 70 directly.
℃
℃
℃
The Highest temperature is 70 and the lowest temperature is 35 .
℃
℃
7
）
After the power on, press power key one time, Heating sign start flash, indicating the
heating element start work, machine is going to access heating up mode. Heating symbol
can flash while products are heating up until the first time products reaching set
temperature. Thereafter it can stop flashing till the end.
8
）
The default mode of bell
is on alarm when starting up machine. Bell will alarm when
setting program is finished. The alarm sound is Di, Di, Di. User also can set bell on mute
mode
.
8-1
）
Press "Set" button for 3 seconds, product will access mute mode. LCD display will
show
symbol, when setting program is finished, product will not have alarm sound.
8-2
）
Again press "Set" button for 3 seconds, the mute mode is cancelled. The mute bell
is replaced by alarm bell
.
9
）
Start/Pause
9-1
）
Press Start/Pause key one time, machine starts working, motor starts work first, 2
seconds later heating element starts working. Only heating symbol on LCD display is
flashing when machine works, other symbols don't flash.
9-2
）
Press Start/Pause key two times, machine stops working, heating element stops
working first, motor still works until 2 seconds later. Machine accesses stand by mode,
14
/
29
