THIS EQUIPMENT MUST BE GROUNDED
In Malfunction or defect in the device is the ground the least resistance the current is reduced and thereby
the risk of electric shock to the user. The AC power cord is connected to a suitable outlet be connected to all
national standards and regulations regarding installation and grounding must comply. The operating voltage
is the national power supply. If you are not sure whether the outlet is properly grounded, ask a qualified
electrician or maintenance technician to check. Take no changes to the device plug. If a non-matching
connector on unit be mounted, please leave a suitable plug from a qualified electrician. Do not use this
device with adapter plugs
USE OF EXTENSION CORDS
Use only 3 wire extension cord, with plugs and grounded with safety, which for the connector suitable. Use
only extension cord designed for outdoor use and make it tightness with the socket.These extension cables
are as follows: Noted marked "Suitable for outdoor use, When not in use, do not keep it at outdoors, Use an
extension cord the rated voltage and rated current suitable for the appliance. Damaged extension cords must
not be used,Check extension cords before operation and exchange it if it damage. Use extension cords only
for the intended purpose. Do not use the cable, especially when they are pulled to the plug from the AC wall
outlet. Put the cable away from heat, and do not over sharp edge, always disconnect the extension cord from
the wall outlet before removing the device from extension cable connector. Damaged power cables or a
special cable with connector can only be replaced the manufacturer or customer service representatives.
WARNING
– To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch
the plug with wet hands.
Do not use the appliance if a supply cord or important parts of the appliance are damaged, e.g.
safety devices, high pressure hoses, trigger gun.
If an extension cord is used, the plug and socket must be of watertight construction.
WARNING: Inadequate extension cords can be dangerous.
Remove the plug from the socket-outlet during cleaning or maintenance and when replacing parts or
converting the machine to another function.
PROPER USE OF THE PRESSURE CLEANER
THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY!
DO NOT USE HOT WATER IN THIS PRESSURE CLEANER.
1. Operate the pressure cleaner at no more than the fluid pressure rated for the pressure
cleaner. Never run the pressure cleaner without a water supply. Running the unit without a
water supply will cause irreparable damage to the unit.
2. Make sure that the water supply you use for the pressure cleaner is not dirty, sandy, and
does not hold any corrosive chemical products. Using a dirty water supply will compromise
the long life of the pressure cleaner.
3. CAUTION - The pressure cleaner can be used for a variety of applications including
washing cars, boats, patios, decks, garages etc. where high pressure is necessary to
remove dirt and debris.
High-pressure water flow can damage the work surface if not used properly!
See the
section titled “Operating Instructions” for more details. Always test the spray in an open
area first.
4. NEVER move the unit by pulling on the high pressure hose. Use the handle provided on
the top of the unit.
5. Always hold the high pressure gun and wand with two hands. Keep one hand on the
gun/trigger, while supporting the wand with the other hand (see diagram).
18/42
