INSTRUKCJA OBSŁUGI
TO URZĄDZENIE PRZEZNACZONE JEST DO UŻYWANIA WYŁĄCZNIE Z ZIMNĄ WODĄ! NIE UŻYWAJ
GORĄCEJ WODY W TEJ MYJCE CIŚNIENIOWEJ!
Uruchamianie
Po podłączeniu myjki ciśnieniowej do źródła zimnej wody należy postępować w następujący sposób:
-
Upewnij się, że przełącznik ON/OFF znajduje się w pozycji OFF.
-
Podłącz wąż ogrodowy do złączki wlotowej.
-
Podłącz wąż do pistoletu zgodnie z instrukcją montażu, krok #1.
-
Mocno przykręcić uchwyt myjki do korpusu zgodnie z instrukcją montażu krok nr 2.
-
Zainstaluj hak pistoletu i hak przewodu zasilającego, przykręć uchwyt pistoletu zgodnie z instrukcją
montażu, krok nr 3
-
Włóż regulowaną dyszę natryskową do pistoletu zgodnie z krokiem montażu #4.
-
Podłącz wąż wysokociśnieniowy do złączki wylotowej wysokiego ciśnienia zgodnie z krokiem
montażu nr 5.
-
Podłącz wąż ogrodowy do złączki wlotowej myjki wysokociśnieniowej zgodnie z krokiem montażu nr
6.
-
Całkowicie otworzyć zawór dopływu wody.
-
Przed włączeniem urządzenia naciśnij spust pistoletu, aby wypuścić całe pozostałe powietrze z
pompy i węża.
-
Uruchom myjkę ciśnieniową, przestawiając włącznik/wyłącznik do pozycji włączonej i naciśnij spust.
PRZYPOMNIENIE: Silnik nie pracuje w sposób ciągły, tylko po wciśnięciu spustu.
OSTRZEŻENIE – RYZYKO OBRAŻEŃ! Urządzenie rozpocznie natryskiwanie po
naciśnięciu spustu. Podczas wyłączania urządzenia po użyciu, w wężu i urządzeniu
nadal panuje wysokie ciśnienie. Skieruj pistolet w bezpiecznym kierunku i rozładuj
nadciśnienie. NIGDY nie kierować strumienia wody pod wysokim ciśnieniem na ludzi
lub zwierzęta.
Automatyczne włączanie/wyłączanie
Myjka ciśnieniowa wyposażona jest w automatyczny włącznik/wyłącznik. Myjka ciśnieniowa będzie działać
tylko wtedy, gdy wyłącznik zasilania jest w pozycji ON, a spust pistoletu jest wciśnięty. Po zwolnieniu spustu,
aby zatrzymać rozpylanie wody przez pistolet, silnik myjki ciśnieniowej zostanie automatycznie wyłączony.
Po prostu ponownie naciśnij spust, aby wznowić używanie środka czyszczącego. Aby przestać używać myjki
ciśnieniowej, zwolnij spust i przełącz urządzenie do pozycji OFF. Urządzenie powinno być całkowicie
WYŁĄCZONE, gdy nie jest używane lub bez nadzoru.
8/42