Lock the handle on the end of the plastic hose before use.
Cover for noise reduction Cover for blower
You can replace 2 covers in different cases.
Normally the cover for noise reduction is installed for reducing the noise and secondary
filtration.
In order to use the blower,
replace the cover for blower for the cover for noise reduction;
insert the hose connector into the blower mouth as shown in the picture, and turn on the
machine.
As shown in the picture, connect all the accessories for wet & dry cleaning.
(2) Operation
1. Insert the plug into the supply socket.
2. Press switch button, the machine
3. You can adjust the airflow by pushing the begins to work sliding block up and down.
16/19
