press
button two times, machine stops work, heating element stops work first,
motor still works until 2 seconds later. Machine accesses stand by mode,
start flash
.
Again press
button, machine recover start mode. only heating symbol
continues flash until reaching the set temperature.
6.
Finish
When setting time is over, program will close heating element first, motor will continue to
work, 2 seconds later motor will stop working. Meantime products will get out alarm sound
for 5 times.
Each alarm sounds 10 seconds apart. Alarm sound is DI, DI, DI. Only time
flashes on LCD display, other symbols don't flash. After time
flash 1
minute, program will close power supply, LCD display will change to black screen state.
Product Operation and Cautions
I. Operation
1.The Dehydrator tray shall be clean and wiped by cloth for initial use.
2.The pre-treated food is placed on each tray; the trays are then put on the unit housing
and close the cap.
3.Power cord connects to the socket, the unit is powered on and the power button
pressed. Adjust the temperature button to the temperature as you need. desired.
4.Dry the food based on different kinds and tastes.
5.Once the food drying is completed, press the button to the lowest setting and turn off the
power, unplug the unit.
6.Clean the tray and liquid collecting chamber after the drying is done. To the lower one;
when the food is placed, the cap shall be closed, or the drying time and the taste of the
dried food will be affected.
Process before Food Drying
(Note: The below suggestion is for reference only)
A. Pretreatment of fruits
1. 1/4 glass of juice plus 2 glass of water, all food to be dried shall be dipped for around 2
minutes. (Note: To combine juice and food, such as the apple juice plus the apple)
12/25
