18
M5 – Eco
CE
Installing the pumping unit
The pumping unit, dispatched separately from the
rest, can be installed after installing the mixing
chamber.
To do this turn the mixing chamber upwards and
prevent its possible overturning by blocking the
fixing lever
(1)
in position on the sleeve.
Mount the pumping unit and lock the two
threaded nuts well with a spanner for nuts.
Various pumping units can be installed on the machine. In any
case make sure that the pumping unit has been mounted
centred on the mixing chamber.
Installing the cell disc
The cell disc can be dispatched separately and must be installed before
starting the machine. It is, therefore, necessary to dismantle the protective
grill, then insert the cell disc on central cone
(A)
of the machine and
check that central pin
(1)
is inserted on the cell disc. Unscrew the
hexagonal flange nut manually
(2)
, fix with a suitable tool, and insert the
protection, fixing both safety pins
(3)
. Then mount the grill and fix it to the
funnel
(4)
of the machine.
Danger of being hurt!
The machine cannot be used without the use of fixed grills!
Extreme danger of being hurt!
1
Important
1
A
2
4
3
ATTENTION
www.markham-sheffield.co.uk - Tel: +44 (0) 1909 730861
