7
M5 – Eco
CE
G
ENER AL S AFETY REGUL ATIO NS
The following general safety regulations and the information contained in
the present manual need to be followed completely to guarantee safe
functioning and to avoid damage near the machine.
Failure to observe them can lead to damaging the plant or danger to
people.
The above-mentioned aspects are to be considered as additional to the
references present in the manual.
It is above all a matter of your safety!
General
Before eventually starting work with the
MALTECH
machine it is necessary
to read and fully understand the content of the general safety regulations
and the use and maintenance manual.
If, after reading, specific points are not clear or problems arise not treated
in the use and maintenance manual, please call the manufacturer
immediately who will provide all the relevant explanations.
MALTECH
as manufacturer of the
MALTECH
machine does not accept
responsibility in the case of modifications made to the plant to whom the
machine has been sent.
Possible modifications to the plant must be performed by the manufacturer
or by those approved in writing.
MALTECH
declines any responsibility for damage or possible accidents
due to incorrect use, insufficient maintenance or the use of non-original
spare parts.
The present use and maintenance manual is an integral part of the
MALTECH
machine and must be conserved in a recognisable place of
easy and rapid access for the operator.
For the remaining risks existing, always in relation to the use in conformity of
the machine, refer to the safety regulations contained here.
The above-mentioned preventive measures must be fully observed.
Working clothes
Always wear suitable working clothes.
Accident prevention shoes/ Protective helmet
Wear accident prevention shoes and protective helmets during
all uses of the machine.
Danger of being cut
The bag-breaker is to be considered a dangerous area.
Technical preventive measures are not possible because of
restrictions to the function. Protective gloves must be worn while
using the machine to avoid possible cuts.
www.markham-sheffield.co.uk - Tel: +44 (0) 1909 730861
