Connections
Belt Clip
For fixing the handheld, e.g. attaching it to
your clothing.
Contact Strip
Contacts for connecting a
data interface and the charger.
Antenna Interface
For connecting the screw-on
antenna (only for dualfocX®).
12 pin Interface
Connecting an accessory
Battery Release
For unlocking the battery. The
release buttons are attached to
both sides of the battery.
Pictograms in the Display Field
Point-to-point Call
Conference Call
Group and Broadcast Call
Incoming point-to-
point call
Point-to-point call
is busy
Incoming confe-
rence call
Setup Group call
Setup of a point-to-
point call
Connection is busy
Setup of a confe-
rence call
Setup Broadcast call
Existing point-to-
point call
No point-to-point
call is possible
Existing conference
call
Incoming Group- /
Broadcast call
Point-to-point call is
placed on hold
Point-to-point call
failed
Conference call
failed
Waiting Group- /
Broadcast call
Waiting point-to-
point call
Call interrupt
Conference call is
busy
Existing Group- /
Broadcast call
Emergency call
Group- / Broadcast
call failed
Switch on / off Handheld
Switch on:
» Press the exit button.
The handheld is initialised after is switched on.
» Enter the PIN code.
The PIN request only appears if the SIM card requires this.
» Confirm with the left-hand selection button OK.
Switch off:
» Press and hold down the exit button for 3-4 seconds.
» Confirm with the left-hand selection button Yes.
The handheld disconnects the connection. The display and keypad lighting is switched off.
After a short time the handheld switches itself off.
Registered State
Switch off
2
