Contact Strip
Contacts for connecting a
data interface and the charger.
Setting up an Emergency Call
» Press the emergency call button.
The emergency tone sounds max. 5 s.
» Press the PTT button within 3 s.
If the PTT confirmation is not given, the display switches back to the previously used state.
» Hold the handheld in your hand to speak and listen.
[1] Press and hold down the PTT button to speak.
[2] Release the PTT button to listen.
Setting up a Point-to-Point Call
Call on number dialled:
» Enter the number to using the numbers block to
the initial state.
» Press the send button.
The connection is established. The display shows the call number
and the dialling symbol.
» Listen and speak like a conventional mobile phone.
Call from the phonebook:
» Open the menu Phonebook >Phonebook
entry [x].
» Select the entry.
» Press the send button.
» Listen and speak like a conventional mobile phone.
Setting up a Group Call or Broadcast Call
Group- and broadcast call from the phonebook:
» Open the menu Phonebook > Broadcast call >
VGC [x] / VBC [x].
» Press the send button.
The display shows the VGC / VBC and the dialling symbol.
» Press down the PTT button to speak.
» Release the PTT button after speech.
» Press the exit button, to terminate the outgoing call.
The display shows the VGC / VBC and the derogation symbol.
Requirement:
A group call or groadcast call can only be triggered when a corresponding entry is located on the SIM card.
Incoming Group Calls:
The incoming group call is signalled by an attention
tone.
The incoming group call is signalled by an attention tone.
» Press down the PTT button to speak.
» Release the PTT button after speech.
» Press the exit button, to terminate the call.
The display shows the group number and the derogation symbol.
The system switches back to the basic menu.
Speak
Listen
3
Note: Further function such as conference call and hold occurs during a call via the left-hand selection button Options.
www.malux.se
