Mamas & Papas GO1M-R1 perfect height swing Instructions For Use Manual Download

Page: 3 / 16

– 3 –

PRODUCT INFORMATION

Rear leg A

ASSEMBLY

COMPONENTS

The Perfect Height Swing is designed to be used by newborn babies and infants. Its unique
Newborn & Infant Seat Positions give comfort and enjoyment to your baby.

• The seat can be reclined into two positions.

• The seat can be set at two different height positions: the raised position for newborns and

the lowered position for infants.

• Variable swing speed control.

• Seat lock for feeding.

• Padded seat cover and head support which can both be easily removed for cleaning.

• Includes a three-point safety harness. Always fit the harness when your child is in the swing.

• Removable snack tray for easy baby loading.

•Detachable play centre with toys, lights, sounds and tunes.

• Swing frame folds easily for storage.

Rear leg B

Front leg B

Front leg A

Rear feet

Seat with seat

cover & harness

Head support

Front feet

Tray

Play centre

Cross-head screwdriver.

Tools needed for assembling the Perfect Height Swing:

Summary of Contents for GO1M-R1 perfect height swing

















Search results

Summary of Contents for GO1M-R1 perfect height swing

Reviews:

Related manuals for GO1M-R1 perfect height swing

Brands by name

Popular brands

Mamas & Papas GO1M-R1 perfect height swing, Instructions For Use Manual

Search results

Summary of Contents for GO1M-R1 perfect height swing

Reviews:

Related manuals for GO1M-R1 perfect height swing

Brands by name

Popular brands