8
1
2
3
1
1
2
fastening the Safety Belt
Slot the two metal sections of the buckle connectors together (1).
Slot the two buckle connectors into the slot in the top of the buckle until they
“click” into place (2).
Always check the harness is correctly locked by pulling the shoulder straps
upwards (3).
To release the harness, press the red button on the buckle downwards.
pull the shoulder straps upwards to
remove the slack from the lap sections
of the harness (1). Now pull the adjuster
strap until the harness is fully tightened (2).
The harness should be adjusted as tightly
as possible without causing discomfort to
your child.
Ensure that the lap strap portion of the
harness is located as low as possible
towards the thighs-not around the tummy.
A loose harness can be dangerous. Check
the harness adjustment and tighten each
time the child is placed in the seat
Tightening the harness
Summary of Contents for Moto G123
Page 1: ...x1 15m TKCS_0111_0413_V3 Mamas Papas Ltd 2013 G123 Car Seat...
Page 6: ...6 Attaching the backrest to the Booster Seat...
Page 19: ...19...
Page 20: ...20...