– 10 –
Step 14
Select one of the cot sides
and position it between the
cot ends with the detail on
the side slats facing towards
the inside of the cot. Insert
two barrel nuts (
G
) into the
holes in the underside of the
top rail (
3
). Ensure the slot in
the barrel nut heads are
facing the connecting holes.
Fasten the side in position by
inserting two assembly bolts
(
H
) in the top holes of the cot
ends. Tighten them into the
large barrel nuts using a flat-
head screwdriver.
Note
: You may need to rotate
the large barrel nuts to align
the hole with the bolt.
FITTINGS
G / Large barrel nuts x 2
H / Assembly bolts x 2
G
H
3
Step 13
Attach the base (with the
information label facing
upwards) by lowering it onto
the base brackets so that the
threaded ends of the base
brackets fit into the holes in
the corners of the base.
Push the base bracket nuts
(
J
) into the holes in the
corners of the base and
screw them onto the
threaded ends of the base
brackets using a flat-head
screwdriver.
FITTINGS
J / Base Bracket Nuts x 4
J
Murano Cot-Bed V3 24/4/08 10:56 Page 10
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
