– 14 –
Step 22
Slot the unthreaded ends of
the four base brackets (
I
) into
the top base height position
on the inside of the bed end
legs.
FITTINGS
I / Base Brackets x 4
Step 21
Position the bottom rails (
4
)
between the bed ends with
the slots for the side rails
facing down. Insert eight large
barrel nuts (
G
) into the holes
in the inside face of the
bottom rails. Ensure the slot
in the barrel nut heads face
the connecting holes.
Align the holes in the ends of
the bottom rails with the
holes in the legs of the bed
ends,
see diagram
.
Insert eight assembly bolts
(
H
) into the holes and screw
them into the barrel nuts in
the bottom rails using a flat-
head screwdriver.
FITTINGS
G / Large barrel nuts x 8
H / Assembly bolts x 8
G
H
4
4
I
Murano Cot-Bed V3 24/4/08 10:56 Page 14
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
