step
7
step
8
Slot the back rail (
10
)
onto the head end (
7
) as
shown.
Fasten the back rail to the
head end by slotting one
of the rail inserts (
h
) into
the hole in the rail.
Push one of the short
bolts (
d
) through the hole
in the rail insert and back
rail.
Tighten the short bolt
into the head end using
the long end of the allen
key (
J
).
Important:
Only half
tighten the bolts into the
cot end.
Slot one of the cot sides
(
9
) onto the head end as
shown in the diagram.
Fasten the cot side in
place by inserting two
long bolts (
e
) through the
end rail of the cot side.
Screw the bolts half way
into the head end using
the long end of the allen
key (
J
).
Important:
Do not fully
tighten the bolts of fasten
the cam in the bottom
rail of the cot side until
the remaining cot side has
been fitted.
-7-
7
10
J
d
H
9
e
J
