step
17
step
18
Extend the drawer
runners from inside the
tallboy and lower the
drawers onto them.
Slide the drawers
backwards whilst holding
the runners in place so
that the hooks on the
back of the runner slot
into the holes in the back
of the drawers.
Slot the pins on the front
of the runners into the
holes in the undersides of
the drawers sides.
Slide the drawers into the
tallboy.
Attach the wall strap (
J
)
to the back of the top.
Slot the screw through
the washer and then
through one end of the
wall strap.
Tighten the screw into
back of the top using a X-
head screwdriver.
The tallboy is now fully
assembled.
-11-
J
Ocean Tallboy (print) V1.indd 11
30/7/08 10:40:52