Fungsi dan Bagian
Cara Penggunaan
1. Combination switch: “OFF” power is off; when the switch is pulled to “0dB”, it is
normal pickup state;“+20dB” is a sensitivity-enhanced pickup for long-distance
pickup.
2. Power indicator: The power on is green, indicating that the microphone has
entered the pickup state; when the LED When the light is bright red, the battery
is low and the battery needs to be replaced. (Note: When low battery is displayed,
The battery can still work normally for 1 hour)
3. connecting cable: Φ3.5 plug spring connecting cable, the length is 700MM;
4. card slot
5. Battery compartment: Install AAA 1.5V alkaline battery
6. Shoe connector fixed plate
7. Shoe connector chuck.
8. Windshield
9. AAA battery
1. Open the battery compartment, please install the AAA 1.5V base correctly
according to the positive and negative batteries marked in the battery
compartment Battery.
2. When the microphone is mounted to the camera or SLR camera, install the shoe
connector to the boots of the device.In the seat, turn the shoe connector retaining
plate clockwise to tighten it.
3. Plug the
Φ
3.5 plug of the microphone into the MIC (microphone) connector of
the device and turn on the microphone.The source switch, at this time the
microphone enters the working state.
4. This microphone can meet the needs of different occasions, with 0dB and +20dB
enhancement.
1
2
6
7
3
8
9
5
4
