51
52
C
S
L
Turn the shutter release mode selector lever to
the "
" position.
When the shutter release button is pressed, the
self timer lamp will blink for 7 seconds. Then, it
will blink more rapidly for 3 more seconds and
the camera releases the shutter. For instruc-
tions about the self timer function, see page 73.
In this mode, the shutter will be released 10 seconds after the shutter release button
is pressed.
Self-Timer Mode ( )
Set the shutter release mode selector lever to “
C
”.
Photographs are taken continuously at a rate of
about 1.2 frames per second.
If you reach the end of the film when shooting in
the continuous mode, “
End
” flashes on the LCD
panel of film holder.
Shutter Release Modes
Continuous Mode
Photographs are taken continuously as long as the shutter release button is pressed.
Set the shutter release mode selector lever to
“
S
”.
The film is advanced by one frame at time the shutter is released.
Single-Frame Mode
ft
m
Oil, dirt, fingerprint, or moisture on the electrical contacts may cause malfunction or
corrosion. Keep the contacts clean with a dry clean cloth.
Electrical Contacts
